Home > Knowledge > Content

What is the difference between addition molding and condensation type silicone pressure-sensitive adhesive?

Dec 02, 2019

There are many types of organic silicon pressure-sensitive adhesives, which can be divided into addition molding and condensation type, then the difference between addition molding and condensation type silicone pressure-sensitive adhesive? Next, I will introduce the differences between the two, and follow this article to understand.


Additive silicone pressure-sensitive adhesive


1. Silicone pressure-sensitive adhesives have pressure-sensitive adhesives. It is mainly used to prepare high temperature resistant, medical pressure-sensitive adhesive tapes and adhesives.


2. Suitable for the production of special additives such as silicone rubber, silicone gel, hydrogen-containing silicone oil and plastic, resin modifier, dendrimer, etc.


3. It can be used in the preparation of high-performance silicone surfactants; platinum curing agent catalyzes the coating of liquid silicone rubber on the surface of PET substrates.


Note: The pH value of the silicone pressure sensitive adhesive is close to neutral. If you accidentally touch the skin or eyes, you should immediately rinse with plenty of water. If you feel unwell, please seek medical treatment immediately to avoid harm to the body;


Condensable silicone pressure-sensitive adhesive


Moisture vulcanization at room temperature, high bonding strength, mainly used in silicone rubber coated PI high temperature tape, green tape and other products of peroxide BOP system.



RH-S11-Transparent-liquid-oil-based-vinyl



Contact:Sharon Song(Sales manager)

Zhejiang Runhe Organosilicone New Material Co.,Ltd(Factory)

Zhejiang Runhe Chemical New Material Co.,Ltd(Exporter)

Tel:+86-571-85092338
Mob:+86-13805735673
Fax:+86-571-87246635
E-mail:sharon@chinarunhe.com

For more info, pls contact us.

We are always here for you.